In the Art Room: Second Grade Kindness Prints!

I have been oversharing this lesson so much on my Instagram because I LOVE IT! My second graders learned so much in the making of these kindness prints: how to create a printing plate, make marker prints, pull ink prints, burnish their printing plate with spray paint, steel wool and aluminum, use Model Magic to mix colors and create a heart and...last but not least, pick a word of kindness that best resonates with them. DID I MENTION THAT THIS LESSON PACKED A PUNCH?! Holy cats! But, y'all. I'm in LOVE.

 So, how did we create these masterpieces? I created a video to share the process. I thought I'd break it down class-by-class what we worked on. Keep in mind that I have 30 minute art classes with my 2nd graders...so I'll be breaking down my lesson in baby bites for those of you that have hour long classes. Just combine my two days and you'll know what you can accomplish in one class of an hour.

Day One: Chatted about Robert Indiana, looked at his LOVE sculpture. From there, we switched gears and began drawing the designs on our printing plate. First with one color ink pin and then a different color to insure that we made the lines deep enough.

Day Two: Continued tracing and then started coloring our designs with water soluble markers. Early finishers pulled the first of the marker prints.

 Day Three (week two): We spent the class pulling marker prints. Once you print one, you simply recolor and print another! 

Day Four: EVERY ONE'S FAVORITE: INK PRINTING! These kids loved ink printing...and pulled a million amazing prints. The key is having a tray that is rectangular (so the kids only roll up and down; I'm using the lid from my tempera cakes) and using ink. Sorry, no skimping here, paint just won't cut it.

Every two kiddos shared an ink tray and a brayer. I used the same ink and brayer for two classes, back to back. No issues with the ink drying...prints pulled were still beautiful!

 Day Five (week three): I've had the idea of the kids doing something with their printing plates for some time now...and I really thought they would be great embossed. Here's the key: the prep is a little on the heavy side. I laid all of the plates on a large sheet of paper, gave them a shot of 3M spray glue and covered them with inexpensive foil. Then I sprayed them all with the $1 a can matte black spray paint from Home Depot (this is the ONLY paint to use when doing this kind of project, it burnishes off the easiest!). Then the the kids burnished off the spray paint and they were amazed with the results. Some even wanted to add color:

 While pretty, I would recommend skipping this step. It just about killed my Sharpies as the tip of the marker was ruined by the spray paint particles. 

Day Six: We made Model Magic hearts! The kids could pick any two primary colors and white. They rolled them, twisted them until they got their desired color/design. Then they shaped them into hearts. They had to also decide upon their word of choice...so they would know where to place their heart. Their heart would act as the dot to the I or the O.

Day Seven: LAST DAY! We used strips of 4.5" X 1" pieces of paper to create our words. They were glued down. Then the kids picked a construction paper frame and decorated it with sparkle tape I found at the Dollar Tree!

A long project? YES. Did they learn a lot of new styles, methods and techniques? YES-YES! I would definitely do this again...I can't wait to hang these in the hall!