In the Art Room: A One Class Clay Project

So I've got this super fun group of kids that hang out in my art room every Tuesday and make stuff outta clay. It's a class of about 15-ish first through fourth grade kids. We have a glorious hour of art makin' together and this here is one project we busted out in one of those classes. It's a project that I used to do all the time with my second grade kids until I just got so tired of it, I couldn't do it anymore. You know what I'm talking about, right? Howevers, it is one of those everybody-loves-it/they-always-turn-out-fab/personalized-and-thusly-awesome project that bears repeating (gah, I do love that saying as it always puts the image of a buncha repeating bears in my head).

This is also one of those fire-it-once type of projects which is always a plus. Most projects I do with the kids usually require both a bisque and a glaze firing. Which is tiresome for a super lazy art teacher like myself. Without sounding like an old lady, does anyone else experience a little back aching from leaning over the kiln whilst loading and unloading? Please tell me it's not just me and my whiny/gripey personality.

So just how were the bad boys completed in under 60 minutes? Well, lemme show ya.

I gave each of the kids a hunk of low fire (Cone O6) clay the size of  a large orange. I have a variety of doilies, pieces of burlap and lace that we use for texture. The kids pick one and place it on their clay mat.

The lump of clay is then dropped onto the doily covered mat and pounded flat. This is usually when my left eye begins to twitch and the onset of a headache begins. A room full of 15 kids pounding the daylights outta clay is just a lil holy-crap-this-is-my-life?! inducing. Thankfully it ends rather quickly as the kids know to stop the pounding when their clay is as thick as a cookie.

The clay is then pealed off the doily and placed right-side-up on the clay mat.

I then gave the kids a variety of templates to trace for their wall hanging. Some are flower shaped, square, round, whateves. When tracing with a skewer, it's key that the stick stand tall and vertical ("like a soldier") so that it can cut all the way through the clay. Otherwise, you'll get that unappealing shark's tooth edge and, like I always tell 'em, it's not Shark Week in the art room.

Then the glazing begins. Now, we used Stroke and Coat by Mayco for this project. Normally, I'd only use that kind of glaze after a bisque fire. However, for this project, the glaze had double duty (OMG, do your kids also loose their sh%% if you say the word "duty"? Make it stooooop, y'all!) by not only acting as a colorant but as glue. 

See? Roll a coil, shape it into your initials, a shape, whatever you like and press it into the wet glaze. 

Most kids opted to also paint their letters and add a lil decoration to the background. I used the back of the paint brushes to create two holes to hang the masterpiece.

When they came outta the kiln, the kids were given a piece of Twisteez wire cut in half and the chance to dig around in my big ole bucket of beads.

So I was gifted this giant stash of beads which is cool because the beads are super unique. There's dolphins and cat beads, flower and sparkle beads. You name it, there's a bead for it. However, I warn you, if you unleash the kids on beads, it's like a piranha attack (P.S. never EVER image search "piranha attack". I can't unsee what the interwebs just showed me, waaaahhhh!). Just place a handful of beads on a couple plates on the tables and step back. I did limit the kids to only 10-ish beads so they could pick the ones that meant the most to them...and save some for the rest of the kids on the planet.

We have a lotta school pride at my school. This dude showcased the school initials and used school colors. 

So often our clay projects take many sessions. With this quick lesson, the kids were thrilled to be able to take their creations home and share them with their families. And who can blame 'em? They're pretty rad.

Read more »

In the Art Room: Pandas with Personality by Fourth Grade Artists!

Howdy, friends! I trust that most of y'all have been spending your summery days chillaxin' like these two. Sunny day, cold bevvy, fancy umbrelly and a polka dot bikini? Why, don't mind if I do! My genius fourth grade kids created these Pan-duhz with Personality at the end of the year and I'm still chucklin' at their silliness. 

As y'all might recall, I did share with ya's our annual art show where every masterpiece each and every kiddo created throughout the year was hung all over the place. Like, we're talking around 2000 pieces of art. Y'all, we covered every inch of that school...so much so that I was a breath away from hanging some artwork in the bathroom stalls (which reminds me: does anyone else love those stall-ads as much as I do?! Although, I gotta tell ya, I do find the restaurant ads a wee bit disturbing when I'm, well, you know. Droppin and ploppin). When I was out for a coupla days for the amazing NAEA convention in San Diego, my awesome sub had the kids create those Party Panda paintings. This proved to be the perfect jumping-off point for our ceramic endeavors. 

Lemme break down for just how the kids created these cuties: 

Day 1: We created the base. To do this, pounded our Cone 06 clay to a cookie thickness. Then we traced a template for our base shapes with wooden skewers. I provided circles, organic shapes or rounded-edge squares. After those were created, the kids created the basic forms of of the panda's body. After our 30 minutes, the kids wrapped their work in a damp paper towel and stowed it in a labeled ziplock bag.

Day 2: I demoed some ideas on how to make a panda head. We looked at a boat load of examples and thought about our fun drawings. The word of the day was personality. The more your panda had, the better. Once the heads were created, the kids started attaching them to the bodies and kind of playing with just how their panda's body would look. Would he be sunbathing? Chillin with the kids? Strummin' a gee-tar...

whilst wearing shades and sportin a big pink bow?

Or glazing their clay pinch pot, as pandas like to do.

Days 3 and 4: On these days the kids really started thinking about details and an environment for their panda...one that would really reflect their panda-nality.

A coupla of my kids recalled that our local zoo had just hosted a red panda exhibit. With that in mind, this cutie was created.

I love the sweet gaze of the baby panda to it's mama.

Once our friends were fired, we glazed them with 3 coats of Mayco Stroke and Coat. My fourth grade friends have created a masterpiece outta clay every year since kindergarten so they are pretty much like experts at this whole process. Hence this panda-monium. 

Speaking of pandaemonium...

Y'all, this week, I'm currently at the amazing Tennessee Arts Academy and gearing up for this Thursday's online conference with The Art of Education which means my life this week is crazy-happy-fun-busy. So don't ask me why I thought it would be a good idea to start the Artsy Book Club this week. Thereforeness, I've decided to officially begin posting next week...but y'all can start reading Teach like a Pirate by Dave Burgess and/or Printmaking Unleashed by Traci Bautista any ole time, ermkay?! I'll be back soon with a full report on the Arts Academy...and I hope to chat with ya at the AOE conference. Til then, strap on that bikini, slap on that sunscreen and enjoy these summer days while you can!

Read more »

In the Art Room: Ceramic Chinese Dragons with Third Grade

 Well, kids, it happened. I got That Note in the mail. You know, the one with the return address from your school.  In the middle of summer that could only mean one of two thangs: it's yer walkin' papers or, worse, a note containing a  listing of "Back to Cruel, er, School" meetings. That's right. Tuesday, July 9th marks the beginning of the end of my summer. Cue loud and obnoxious horror film-esque scream...

Make no mistake, this has left me in a rather fire-breathingly fowl mood. So what better time to share with ya these here Ceramic Chinese Dragons by my Amazingly Awesome Third Grade Artists!

 Since I've been spending my blogging time sharing travel pics and rando Pee-Wee packed posts, I've fallen a pinch behind on my In the Art Room adventures. My apologies. So whatcha see here is a project that I think my third graders would agree was one of their faves. Now, for those of you out there that are kilnless, hang with me as Ima gonna show you how you can create a Chinese dragon with a ceramic clay-ternative. But before we get into all that, lemme tell you how this all came about.

 Because we were learning about all-things-Asian last school year, I settled on the idea of having the kids create Chinese dragons. After a quick search on the interwebs, I found this post by my art teachin' buddy Rina over at K-6 Art. I loved her lesson as she broke it down into baby steps that were just perfect. Now she did her dragons with the younger set (first grade, people and they rocked it!). Since I was doing this with third grade, I knew I'd have to get 'em to step up their dragon makin' game. But first, a lil dragon-y background, emrkay?

Not all dragons are alike, y'all (Y'ALL!! This is off-topic but what else is new: I was recently BUSTED as a Mid-Westerner wearing Southern's clothing {which would be overalls and Crocs, in case you were wondering}. It turns out I've been conjugating "y'all" all wrong! Thank you, kind commenter, for pointing out my Big Fat Hairy Southern Poser mistake. Hopefully my Southern license won't be revoked {penalties include grits restriction and consumption of unsweetened tea}).

WAAAAAAAIT, what were we talking about? Oh, yeah. Dragons. Let's address the Chinese ones first, shall we? They're kinda like Mid-Westerners, after all. They've got a snake-like body with feet like that of an eagle. Which doesn't really make them Mid-Western-esque at all but their affinity for Pabst Blue Ribbon and corn hole does (can somebody please explain that fascination to me?!). Also, they can fly but don't have wings. And they like their possessions deep-fried as is evidenced by the fried pearl (the Chinese dragons are often seen with a pearl which is believed to be their source of power).

 My students were pretty unfamiliar with the characteristics of the Chinese dragon because they're usta seeing this European/Fairy Tale number. The Euro-dragon is much lie a Southerner in that when it says "Bless your heart" it really means "I hate you and wanna breathe fire down your neck". Also, when it's not flying with it's wings, this dragon can be seen wearing copious amounts of seersucker. And loafers without socks. And shirts with GIANT Polo logos. Ahem.

 After that brief chat with the kids, we spent three / thirty-minute art classes crafting these bad boys. On our first day, we began by creating a base for our dragon. For that we pounded our clay onto a texture and into a slab as thick as a cookie. Check out this post to see what I'm talking about. After our texture was in the clay, we cut the clay out with our wood skewers into a choice of base shapes: round, square or flower-like (which was later folded up to create water-y like waves).

With the excess clay cut off from the creation of the base, the kids rolled a thick coil that was about 5" in length. Once that was complete, we draped the base and coil in a damp paper towel, gently placed it into a zip lock bag and wrapped it up until our next 30 minute class.

The following class I gave the kids a rough and rapid idea on how to create their head (see below in just a momento). I don't like to get too detailed because I want them to come up with ideas of their own. I also had loads of Chinese dragon pics available for them to draw ideas from if needed. At the end of that 30, we didn't attach the heads (I had visions of them falling off whilst sealed in the damp bag) but placed them on the base with the coil.

On their third and final day, heads were attached and an environment for the dragon was created. If details like spikes, limbs, horns, fire, you-name-it's were desired, the kids added 'em then. After drying out and being fired (kinda sounds like I'm talking about Lindsay Lohan, donnit?!), the kids spent a coupla days glazing with Mayco's Stroke and Coat. And, viola-ness! Ceramic Chinese Dragons, y'all!

 Now, let's address the kiln less folks in the group, shall we? A similar dragon can be created with one of my fave kiln-free clays: Scupley. Almost every year, my students engage in a Sculpey bead-making project and almost every year, this is all that's left. Lots and lots of white.

 No worries! You can create any color of clay using that white stuff as your base. Case in point, a dragon's head. Just roll the desired shape in white, flatten your color to a paper-thickness, wrap it around your shape and roll smooth.

 Which might look a lil like the left. If you have white spots, fill 'em with some Scupley Band-Aids and roll again.

Now, these are the same rough and rapid directions I have the kids when they were creating their dragon's face. Use that skewer to skewer a mouth. It kinda mashes the shape a bit so you'll have to resculpt that face. But you can do it. 

 I like to use my fingers to create the indentions of eye sockets. Now roll some small spheres (because we don't say "balls" in the art room, ahem) and place them in the sockets. Remember if you are working with ceramic clay, you gotta slip and score. She slips! She scores!

 It's all about the details, y'all. Add some teeth, fire coming outta the mouth, a tongue (although preferably not all three as that's a mouthful. Literally.)

 I created a coil body in the same white-covered-in-green way as the head. Although this time I used two kinds of green and left some of the white areas alone. I was kinda digging the camo look.

 I know, right?

 Attach that head to the coil and shape. Bake in your oven at 275 (I think, check directions. I burn everything on a regular basis so my clay-cooking advice might not be the best) for abouts 15 minutes. And your finished!

 Suriously, yous guise, the kids were so thrilled with their dragons.

 I love watching the kids work with clay. It's a medium that kids who aren't fascinated with 2-dimensional art can really bloom. I mean, this artist was so into his dragon-making, he even created a baby dragon!

 You'll notice that most of the kids included a pearl...and many of them had a story to go along with their dragon. I love the detail in the face on this orange guy.

 And there you have it, y'all! Chinese dragons by the third grade set! Have y'all ever done a project like this before? If so, I'd love to hear what your students created. Special thanks to Rina for the inspirational-lesson!

Chat at Y'ALL soonish!

Read more »

In the Art Room: A Pinch Pot Mascot

Well, kids, as you read this, I'm heading out the door and takin' a vacay to charming Charleston with a coupla muthahs. That'd be my dear, albeit totally crazy, mother and my mother-in-law (who will be in need of your prayers as she contends with a double dose of deranged). If one of us doesn't make it back, it'll be my mom who I'll prolly leave tied to a chair in the hotel room with tape over her mouth (true story: in elementary school, my mom talked so much the teacher resorted to taping her mouth closed. She promptly chewed through the tape and commenced chatting. This is what I'll be dealing with). Wish me luck, kids!

In the meantime, I thought I'd share with you these here 2nd grade Pinch Pot Tigers! At my school, the tiger is our mascot so the kids were totally excited to bring the Johnson Tiger to life. Some kids went the traditional Bengal orange and black tiger route...

While others created a white tiger. Did you know that the white of the tiger's fur is a recessive gene? Some mistake them for being albino but that's not so. Many white tigers are bred but, because there are so few of them, there is usually inbreeding. This results in all sorts of birth defects and also has scientists considering renaming the White Tiger the Kentucky Tiger (so sorry, Kentucky friends. That was a low [although hilarious, right?!] blow).

The kids loved creating these tigers. I was so thrilled to see them painstakingly paint those wee tiger faces. That's when you know they are in love with their project, when they put forth so much effort. 

So just how'd they do it? Well, we started out with these supplies:

* Low-fire clay (I'm a Cone 06 gal, myself)

* Toothbrush (preferably your mom's or mother-in-laws, depending on who you're ticked at)

* A skewer

* Aqua

* A clay mat. Canvas works great.

To create these bad boys, we used 2-3 thirty minute classes. On the first day, we made a pinch pot and tiger legs. For the pot, I tell the kids to begin by rolling a sphere and placing it in the palm of your hand. Notice that the sphere isn't perfect. I try to discourage the kids from rolling a perfect sphere because they will do it FOREVER thus drying out their clay and using up precious art time.

Next up: stick your thumb in that sphere of clay until it looks as though your thumb has an afro. Do not puncture your thumb all the way through your clay as that would result in a clay donut. And don't nobody like clay donuts. They's nasty.

Pop that thumb out and use your pinching fingers to evenly pinch the sides of your pot. It should be of cookie-thickness. Once completed, the kids are given another piece of clay. For this, they'll divide the clay in half and roll two coils that are about 4" in length. I have rulers out on the tables for this reason. Once complete, the kids stack their pot onto their coils, wrap it in a damp paper towel and put it in a labeled zip lock bag until next class.

The following class, we chat about making tiger faces. I don't like to tell the kids an exact way of creating a face so we go through many options. When working with clay, I like to stress that you can make anything outta clay with a sphere, a slab or a coil. We chat about the different features a tiger might have and what, out of those three things, we might use to create them.

When demoing, I always stress that you gotta slip and score. I have the kids use the toothbrush and that cup of water for this purpose. After this chat, the kids work on creating the heads. Because of the detail they like to create, most take the entire time making that clay head. Once finished, it gets placed in the zip lock bag along with the pinch pot and coils.

This young artist didn't like my cartoon-y version of a tiger. I had a buncha tiger photos on display as well as one pulled up on my brand new big screen T.V. (ya'll, this thing makes me feel like I'm in a sports bar, it's that huge). I love how she created a three-dimensional muzzle for her tiger and that painting job, gah! I love my 2nd graders. 

On the final day, we toothbrushed and added the heads and legs. Now, I'm not gonna lie, those legs had been in that zip lock bag for days. So they were a little dried out and noncooperative. To solve that, some kids opted to have their tigers laying down (as the clay was too weak to support the pinch pot) while others crumpled up newspaper and used that to prop up the tiger's legs. 

After the legs and head were attached, some kids created a tail. I had to really encourage them to make strong thick tails that did not protrude. So most rolled a coil for the tail and then turned that into a spiral before attaching to the pot. If the kids happened to have extra time when finished, I told 'em that they could create something to go along with their tiger. However, I reminded them that I'd only fire it if they made sure to slip and score. 

This young artist created a baby tiger to accompany the mama. 

And this one decided to have a mouse riding on the back of the tiger.

Another Kentucky Tiger.

Once the tigers were complete, the kids glazed then with Mayco's Stroke and Coat. It's my fave as the colors are just perfect. The kids spent an art class with the World's Smallest Paint Brushes to create these lovelies. When it comes to glazing, I only have two rules: Don't Glaze the Bottom (because the glaze, when melted, will adhere to the kiln shelf) and Don't Layer Three Zillion Different Colors of Glaze as this will result in an unappealing mix of muddy colors once fired. 

And there you have it, friends! A Pinch Pot Mascot that's both functional ("oh, my tiger can hold my earrings!") and adorbs. Until next time, wish me luck with those mothers and have yourself a great week, ya'll!

Read more »